News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Gasket between Gas cap trim ring and body paint?

Started by 1969chargerrtse, May 05, 2009, 08:17:14 PM

Previous topic - Next topic

1969chargerrtse

69 Charger Gas cap and trim ring gasket.  I can't find this item anywhere, I did email a place suggested any ideas otherwise?  Without this gasket the trim ring would be on your paint.   :'(   I even called Year One, no such animal.
This car was sold many years ago to somebody in Wisconsin. I now am retired and living in Florida.

Back N Black

If you buy the complete body gasket kit, it will be in the kit. I have not seen them sold separately

69bronzeT5

Feature Editor for Mopar Connection Magazine
http://moparconnectionmagazine.com/



1969 Charger: T5 Copper 383 Automatic
1970 Challenger R/T: FC7 Plum Crazy 440 Automatic
1970 GTO: Black 400 Ram Air III 4-Speed
1971 Charger Super Bee: GY3 Citron Yella 440 4-Speed
1972 Charger: FE5 Red 360 Automatic
1973 Charger Rallye: FY1 Top Banana 440 Automatic
1973 Plymouth Road Runner: FE5 Red 440 Automatic
1973 Plymouth Duster: FC7 Plum Crazy 318 Automatic


1969chargerrtse

Quote from: Hemidog on May 06, 2009, 02:40:38 AM
Here's the gasket's that goes on both sides of the quarter:
http://cgi.ebay.com/ebaymotors/DMT-Mopar-Charger-68-69-70-Fuel-Filler-Gaskets-1968_W0QQcmdZViewItemQQ_trkparmsZ72Q3a570Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem3ca15fc21dQQitemZ260405445149QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Ahhhh that's the place Chris ( mod ) suggested.  I wrote them an email, and now I know the answer.  Thanks boys, I spent a long time trying to find that.
So the white foam piece lays under the trim ring and on the body paint?
This car was sold many years ago to somebody in Wisconsin. I now am retired and living in Florida.

Just 6T9 CHGR

Quote from: 1969chargerrtse on May 06, 2009, 04:45:58 AM
Quote from: Hemidog on May 06, 2009, 02:40:38 AM
Here's the gasket's that goes on both sides of the quarter:
http://cgi.ebay.com/ebaymotors/DMT-Mopar-Charger-68-69-70-Fuel-Filler-Gaskets-1968_W0QQcmdZViewItemQQ_trkparmsZ72Q3a570Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a0Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem3ca15fc21dQQitemZ260405445149QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Ahhhh that's the place Chris ( mod ) suggested.  I wrote them an email, and now I know the answer.  Thanks boys, I spent a long time trying to find that.
So the white foam piece lays under the trim ring and on the body paint?

read the auction under the "materials" section

PS---your searching skillz suck! :slap:  :nana:
Chris' '69 Charger R/T


Shakey


When I went to put mine on it made the trim ring / base sit too high so I ended up throwing it in the garbage.  I used a layer of masking tape on QTR.