DodgeCharger.com Forum
October 04, 2022, 05:28:01 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Please remember: this is the place to discuss Chargers - NOT the place to discuss politics. Political posts will be locked or deleted at the Moderator's discretion.
 
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
  Print  
Author Topic: Console wiring harness for floor shifter  (Read 1189 times)
J-440
Full Member
***
Offline Offline

Posts: 478



« on: September 01, 2009, 06:53:03 PM »

  Does anyone make the floor console harness that connects the center console courtesy lights, shifter light, and reverse activator switch that runs under the driver seat and joins with the taillight harness running by the door sill, and finally connecting to the main harness in the kick panel?  Sorry about the run-on sentence.  Year-One, MH Electric and The Paddock don't seem to make a repro.  Any advice?
Logged

68 R/T, 440/727 6-speed, SC G-machine...black suede
Ghoste
Old Timer
*****
Offline Offline

Posts: 41,092



« Reply #1 on: September 01, 2009, 07:42:04 PM »

Bill and Rose Evans.
Logged

gasoline_24
Senior Member
****
Offline Offline

Posts: 592



« Reply #2 on: September 01, 2009, 08:54:19 PM »

Do they also make a power window harness for 68?  Sorry for the highjack.  How are they contacted?
Logged
Ghoste
Old Timer
*****
Offline Offline

Posts: 41,092



« Reply #3 on: September 01, 2009, 09:04:29 PM »

You can e-mail at:
rbevans7@aol.com

Bill & Rose Evans*8835 Parson Rd*Erie,PA*16509
phone (814) 864-2622*fax (814) 866-8184

There is a website at;
http://evanswiring.tripod.com/

But I have never had much luck with it personally.
Logged

J-440
Full Member
***
Offline Offline

Posts: 478



« Reply #4 on: September 02, 2009, 04:43:06 PM »

  Thanks Ghoste...I'll give them a call.  You have a good one. 2thumbs
Logged

68 R/T, 440/727 6-speed, SC G-machine...black suede
gasoline_24
Senior Member
****
Offline Offline

Posts: 592



« Reply #5 on: September 02, 2009, 08:14:30 PM »

Emailed them today and the cost is $75.00.  They do not make the power window harness though.
Logged
Beauregard Duke
New Member
*
Offline Offline

Posts: 13


« Reply #6 on: September 03, 2009, 05:53:42 AM »

  Does anyone make the floor console harness that connects the center console courtesy lights, shifter light, and reverse activator switch that runs under the driver seat and joins with the taillight harness running by the door sill, and finally connecting to the main harness in the kick panel?  Sorry about the run-on sentence.  Year-One, MH Electric and The Paddock don't seem to make a repro.  Any advice?

I bouth from Herb's parts.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.068 seconds with 18 queries.