DodgeCharger.com Forum
January 31, 2023, 12:51:25 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: I have updated the list of DodgeCharger.com shirts!
 
   Home   Help Calendar Login Register Chat  
DodgeCharger.com Forum > Mopar Garage > Paint, Body & Trim (Moderators: Chryco Psycho, hemigeno, firefighter3931, Charger-Bodie) > Easy way to adjust door to fender gap with fender on?
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Easy way to adjust door to fender gap with fender on?  (Read 1059 times)
Blakcharger440
Old Timer
*****
Offline Offline

Posts: 1,166
« on: April 03, 2010, 10:06:52 AM »
Hey,
For some reason my door to fender gap seems to have gotten smaller on my 70 Charger RT.
Is there an easy way to adjust the gap wider with both the fender and door already installed...the grille,front valence and bumper are also on.
Logged
mauve66
Old Timer
*****
Offline Offline

Posts: 4,149


the best dreams have wings and big blocks
« Reply #1 on: April 03, 2010, 06:49:17 PM »
 popcrn
Logged
Robert-Las Vegas, NV

NEEDS:
body work
paint - mauve and black
powder coat wheels - mauve and black
total wiring
PW
PDLKS
Tint
trim
engine - 520/540, eddy heads, 6pak
alignment
BlueSS454
Senior Member
****
Offline Offline

Posts: 819
« Reply #2 on: April 03, 2010, 06:55:15 PM »
With the door all the way open, loosen the bolts on the hinge to the A pillar and slide it back towards the quarter panel.  You will need 2 people to do this.  Also, it would be a good idea to tape up the edges of the fender and door with some 3M green masking tape.  If I recall when I did my car, 2 of the 4 bolts have to be accessed from behind the kick panel so you will need to remove those also.
Logged
Tom Rightler
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.065 seconds with 18 queries.