News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

73 Heater wiring- please help.

Started by 73rallye440magnum, June 16, 2010, 07:40:37 PM

Previous topic - Next topic

73rallye440magnum

On top of my heater box there is a single green wire with a male connection on the end. Is this the power supply for the blower motor? Where is its female companion? I did not disassemble this car and this heater has got me stumped. Any help would be appreciated. Pictures? Thanks! Jake
Current- 70 Charger XH29G Y3, F8, F8

Past- '73 Rallye U code, '69 Coronet 500 vert, '68 Roadrunner clone, XP29H8, XP29G8

Nacho-RT74

blower source... yes... runs to the bulkhead conector and use one of its cavities. Normally on 72/73s is used one of the tranny harness section, what still leaves one cavity empty
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html