DodgeCharger.com Forum
October 01, 2014, 04:11:17 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: I have updated the list of DodgeCharger.com shirts!
 
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
  Print  
Author Topic: bellhousing bolts and starter bolts for 70 440  (Read 1063 times)
moparmendy
New Member
*
Offline Offline

Posts: 30


« on: July 29, 2010, 07:54:22 AM »

Could someone please tell me the bolts sizes and number of each needed for the bellhousing and starter on a 70-440 sixpack motor with manual trans?Huh?

Please note that I do not care about original bolts, just need a good set to get the trans hooked up and starter.

all help would be greatly appreciated!!!!

trying to inch along in the process.   

garymendy@yahoo.com
Logged
John_Kunkel
Old Timer
*****
Offline Offline

Posts: 5,253


« Reply #1 on: July 29, 2010, 02:11:23 PM »


Same as a 727.

The top four bolts are 3/8"-16 X 1 1/4" long.

The bottom two bolts are 7/16"-14, the starter side is 2" long and the opposite side is 1 3/4" long.

The starter stud goes on the bottom, it is 7/16" X 2". The top of the starter takes a 7/16"-14 X 1 1/2" bolt.
Logged

Pardon me but my karma just ran over your dogma.
moparmendy
New Member
*
Offline Offline

Posts: 30


« Reply #2 on: July 30, 2010, 01:05:17 AM »

thanks!!!!!! 2thumbs
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.9 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.051 seconds with 16 queries.