News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Light Socket Solution Idea

Started by dpixel, August 06, 2010, 08:45:08 PM

Previous topic - Next topic

dpixel

Typical Rotted bulb socket.  $2.99 generic replacement

Honed out the inside with a 1/2" round stone drill bit in my drill press to fit the diameter of the new socket. And used a 1/2" round file to make room for the bulb pin slots in the new socket.  Then peened the existing socket to the new one and fluxed and soldered like plumbing.



Spliced new wires and siliconed the socket back and used heatshrink polyo tubing on the splice and installed.  :2thumbs:
Note: Clean all surfaces before soldering and take out wires and gasket before applying heat.
Process makes a good ground too.

CDN72SE

Nice little how-to, thanks for posting.  :2thumbs:
1972 Charger SE