DodgeCharger.com Forum
February 07, 2023, 08:12:33 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Please remember: this is the place to discuss Chargers - NOT the place to discuss politics. Political posts will be locked or deleted at the Moderator's discretion.
 
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
  Print  
Author Topic: My Rallye dash project for today.  (Read 1495 times)
TruckDriver
Old Timer
*****
Offline Offline

Posts: 10,161


From; Lomira, Wisconsin USA


WWW
« on: December 25, 2005, 06:43:05 PM »

Well, I got bord, so I decided to start my dash swapping. Since my car has the generic Rallye dash, I was going to put a clock in it til I scored a dash with a tach. So, I had 2 complete Rallye dashes, one with a clock, one with a tach., and 2 metal dash frame housings. One with the hard to find NON busted off radio hanger, and one with the hanger busted off (for parts). And I also had extra oil pressure & fuel gauge, and a extra water temp & alt. gauges. And, yes, it took a little of everything to make the one good tach dash that is going in my car. Both of the complete dashes I started with, have the tabs for the radio broke off, and rusted/corroded alt. gauge studs. So, I pulled the tach from the dash it was in, as well as the fuel/oil pressure gauge(so I didn't have to use my spare), put it onto the good housing. Then I took a good spare alt/water temp gauge, and installed it too. I also had to keep the gauge cover of the one dash as the one in my Charger is different for a non tac/clock dash. It took about 2-1/2 hours to do. In case you ask why didn't I clean the inside of the good housing? I figured, why bother, you can't see it once the dash is complete anyway. I did clean the lenses though. When its warm enough to work outside (since I have no garage), I'll pull the original dash so I can transfer my 150mph speedo. The others are only 120mph speedos. So, you confused yet?   No?, well I am cause I just realized I put this on the wrong board Roll Eyes Tongue  Sorry Troy.


* MyDashProject1.JPG (81.54 KB, 800x600 - viewed 412 times.)

* MyDashProject2.JPG (101.39 KB, 800x600 - viewed 409 times.)

* MyDashProject3.JPG (113.55 KB, 800x600 - viewed 404 times.)

* MyDashProject4.JPG (64.38 KB, 800x600 - viewed 415 times.)
Logged

PETE

My Dad taught me about TIME TRAVEL.
"If you don't straighten up, I'm going to knock you into the middle of next week!" Tongue
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.041 seconds with 16 queries.