News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Antenna hole cover?

Started by jlatessa, April 28, 2012, 08:29:13 AM

Previous topic - Next topic

jlatessa

Hi folks, does anyone make a kit for covering the antenna hole (top of fender) with a chrome bezel of some sort?
We're not using a radio in our re-do and all I can think of is some thin snap-in type of plug.

This for a 70 Charger,

Thanks,  Joe :shruggy:

twodko

You might try going to a hardware store that carries a great deal of nuts bolts spacers etc. You know, the stores that have all the little pullout trays with multi size parts. They make many types of hole plugs from black plastic to SS chassis plugs. Good luck.
FLY NAVY/Marine Corps or take the bus!

Silver R/T

http://www.cardomain.com/id/mitmaks

1968 silver/black/red striped R/T
My Charger is hybrid, it runs on gas and on tears of ricers
2001 Ram 2500 CTD
1993 Mazda MX-3 GS SE
1995 Ford Cobra SVT#2722

jlatessa

MUCH too late for welding! :rotz:

I'll look for something stainless and buff it up.
Plus some sort of gasket.

Thanks, Joe

68X426

Check this thread: http://www.dodgecharger.com/forum/index.php/topic,71973.0.html

I used what's called a billet cap, available at any auto store in aftermarket accessories. Glued the cap to a bolt and it was done.



The 12 Scariest Words in the English Language:
We are Here from The Government and
We Want to Help You.

1968 Plymouth Road Runner, Hemi and much more
2013 Dodge Challenger RT, Hemi, Plum Crazy
2014 Ram 4x4 Hemi, Deep Cherry Pearl
1968 Dodge Charger, 318, not much else
1958 Dodge Pick Up, 383, loud
1966 Dodge Van, /6, slow

autodynamics

Put some butyl on it and a abs cover

oldcarnut

If you don't find something let me know and maybe I can make something for you.  If its stainless I might even buff it up like chrome for ya.  What color is the paint?

404NOTFOUND

Just snap the antenna off. That's what I did. It wasn't intentional but, now I'm thinking it doesn't look half bad. :icon_smile_wink:
My 1969 Charger. RIP......Rest in pieces.

charger Downunder

Havent seen one for a long time they where an after market plug that could be bought at any auto parts store a round chrome plug with a screw in the top.

Here is the above.
http://www.ebay.com.au/itm/SEALOPLUG-25MM-AERIAL-HOLE-COVER-PLUG-/310392637027?pt=AU_Car_Parts_Accessories&hash=item4844d7c663

This is a nice one bottom of page at link.
http://www.mountneyltd.com/index.php/classic_car/detail/category/exterior-accessories
[/quote]

oldcarnut

The bottom one reminds me of a sink stopper plug.