News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Source for manual brake master cylinder studs

Started by bull, May 18, 2012, 08:19:44 PM

Previous topic - Next topic

twenty mike mike

Quote from: John_Kunkel on June 18, 2014, 12:25:30 PM

Only advantage to the smaller MC is more line pressure for the same pedal pressure but the downside is slightly more pedal travel.

Thanks, John.

CRW-FK5

I'm replacing the master cylinder in my '70 Charger R/T and the new MC did not come with mounting studs.  I was planning on just swapping them with the studs in my old MC but found that the hole diameters on the new MC (.356" dia.) are larger than what they are on the old MC (.334" dia.) causing the studs to be too loose.  I do see replacement studs out there but not sure if they will fit the holes on my old one or new one.  Does anyone know of a correct replacement stud for MC's with the larger hole diameters?