DodgeCharger.com Forum
September 17, 2019, 12:32:33 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: DodgeCharger.com decals are available here!
 
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
  Print  
Author Topic: PIX, UPDAYTED DAYTONA PX , QTR PANEL INSTALL  (Read 1554 times)
daytonalo
Old Timer
*****
Offline Offline

Posts: 4,334


32 SKATER


« on: February 10, 2006, 11:59:53 PM »

HERES A FEW PIX OF MY HEMI DAYTONA [ RECEATION] AS BARRET JACKSON WOULD SAY . THE FOLLOWING PIX ARE OF 6 INCH HOLE CUT OUT UNDER FRONT FENDER WITH PLASMA CUTTER AND QTR INSTALL. THE TECHNIQUES THAT I CHOSE TO USE HAVE GIVEN ME THE BEST RESULTS OVER THE YEARS
CUT QTR OFF 1 INCH FROM JAMB AND 1 INCH FROM DOWN FROM UPPER BODY LINE
FLANGE THESE AREAS WITH AIR FLANGER
THIS IS A MUST , YOU MUST REBUILD DOOR HINGES AND FENDERS TO LINE UP ALL BODY LINES . VERY ,VERY,VERY IMPORTANT?
I TRIM QTR SKIN TO FIT IN FLANGED AREA AND USE 3/16 THICK WASHERS AND SHEET METAL SCREWS INSTALLED JUST ABOVE THE SKIN EVERY 4 INCHES SO THAT THE SKIN IS PULLED IN TIGHT TO GET PROPER WELD
TACK IN PLACE ON EACH SIDE OF WASHERS , THEN STITCH WELD IN SMALL INCREMENTS ON THE TOP EDGE ONLY . DO THIS WITH THE OUTER WHEELHOUSE IN PLACE WITH THE QTR SCREWED AND CLAMPED AT ROCKER
AFTER THE TOP EDGE IS WELDED UNCLAMP ROCKER AND REMOVE OUTER WHEELHOUSE, THIS WAY YOU CAN PULL A WIPE OF FILLER ON THE FLANGED EDGE THEN UNDER-COAT , THIS WAY YOU CANT TELL THERE WAS WORK DONE INSTALL WHEELHOUSE,PLUG WELD
Logged
PocketThunder
Old Timer
*****
Offline Offline

Posts: 10,011


Minnesota


« Reply #1 on: February 11, 2006, 12:04:21 AM »

i cant see sh!t.      icon_smile_big
Logged

"Liberalism is a disease that attacks one's ability to understand logic. Extreme manifestations include the willingness to continue down a path of self destruction, based solely on a delusional belief in a failed ideology."
daytonalo
Old Timer
*****
Offline Offline

Posts: 4,334


32 SKATER


« Reply #2 on: February 11, 2006, 12:10:47 AM »

TAKE IT EASY , CUPCAKE ! SORRY I'M HAVING A PROBLEM WITH CAMERA !
Logged
THE CHARGER PUNK
Old Timer
*****
Offline Offline

Posts: 2,630



« Reply #3 on: February 11, 2006, 12:37:28 AM »

justa question what did your charger start life as?-MATT
Logged
BigBlockSam
Old Timer
*****
Offline Offline

Posts: 8,036



« Reply #4 on: February 13, 2006, 08:24:49 PM »

Quote
  TAKE IT EASY , CUPCAKE   

 smilielol
Logged

I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img
sharpspike
Junior Member
**
Offline Offline

Posts: 144


« Reply #5 on: February 15, 2006, 07:26:45 PM »

i cant see cupcake
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.046 seconds with 17 queries.