News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

440-6 barrel fuel line question or advice needed

Started by cudavic, October 20, 2025, 09:23:34 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

cudavic

October 20, 2025, 09:23:34 AM
Looking for some advice or feedback on a set of fuel lines that I purchased for my 1970 Plymouth Superbird.
The car is a 440-6 barrel and I have questions if they are the proper lines for this application as the lines do not seem to line up properly. Currently everything is just loosely fitted and not tightened up. If anyone has any thoughts let me know. Thanks Vic

b5blue

#1
October 20, 2025, 09:26:29 AM
Don't fear tweaking them some. 

Wingnut426

#2
October 20, 2025, 10:19:18 AM
Don't know about your fuel lines, but the orange painted heater hose nipple is incorrect. WINGNUT
HEMI Daytona Convertible

cudavic

#3
October 20, 2025, 10:39:10 AM
Quote from: Wingnut426 on October 20, 2025, 10:19:18 AMDon't know about your fuel lines, but the orange painted heater hose nipple is incorrect. WINGNUT

Yes I know.
I have the proper one for it but I need to get another pipe bushing for it.

Sgt Superbird

#4
October 22, 2025, 08:12:33 AM
I believe when you tighten the four horizontal fittings, it will draw that fuel line a little closer to the separator nipple. A little tweak, as suggested earlier, should line it up.
Print
Go Up Pages1
User actions