1970 Dodge Charger Bolt-On Hood – NEW – Made in Texas

[JanakRepros]

Brand-new reproduction 1970 Dodge Charger hood, manufactured in Texas by Winged Warrior Body Parts.

This is a complete bolt-on hood — not just an outer skin. Built from our own tooling, it features a detailed factory-style inner structure, correct edge profile, and heavy-duty steel internal reinforcement.

Unlike an original 55+ year-old steel hood, our construction is corrosion and rust resistant, making it a great option for both restorations and drivers.

We offer two versions depending on your build and budget:

• Economy Line Black
Less steel inter construction and
Lightweight construction — ideal for street cars, restomods, race builds, and budget-conscious restorations where factory-correct weight and edge detailing aren't required.

• Factory Equivalent Line Grey-featured in pictures.
Weighs about the same as the original
Factory Edge profile
Heavy duty steel inter construction
Features:
• Complete inner & outer construction
• Factory-style appearance
• Heavy-duty steel internal reinforcement
• Corrosion & rust-resistant construction
• Brand-new production
• Bolt-on design
• Made in Texas 🇺🇸
• Fits 1970 Dodge Charger

Perfect for restorations, R/T builds, or replacing an original hood that is rusted, damaged, or heavily repaired.

We also manufacture:
• 1969 Dodge Charger Daytona hoods
• 1970 Plymouth Superbird hoods
• Daytona & Superbird conversion parts
• Complete Daytona & Superbird conversion kits

Pickup available in Spring/Houston, Texas. Nationwide/world wide freight shipping available. Contact us via phone or email with your ZIP code for a shipping quote.

Check out our website and Facebook page:
Winged Warrior Body Parts

Building Daytona & Superbird reproduction parts since 1978.

[426HemiChick]

Saturday 1232 MST,  29 August 2026

Wishing You-all great success. You picked the most beautiful cars to build parts for.

Former Texan now in Phoenix Arizona; it's warmer and dryer here.

Best wishes, Good Luck and God Bless,

C

[Kern Dog]

Thank you.
What are the prices? I would expect them to be at least $1000 each, right ?

[JanakRepros]

Hey Kern, We do currently offer an economy option for under $1,000, as well as a factory-equivalent option. Please feel free to us a message for current pricing and details. We are happy to help. Janakrepros@gmail.com is our email.

[JanakRepros]

Saturday 1232 MST,  29 August 2026

Wishing You-all great success. You picked the most beautiful cars to build parts for.

Former Texan now in Phoenix Arizona; it's warmer and dryer here.

Best wishes, Good Luck and God Bless,

Thank you very much!

[DAY CLONA]

Nice product, fills a niche that the steel aftermarket neglects, just a few suggestions perhaps?, sanding the glass smooth were it shows on the top skin underside thru the underside frame/skeleton to better simulate a steel hood before bonding the 2 pcs together?, and fill in your bottom/underside skin mold area were the 4 "crush" zones are to make a Daytona hood, easy mod even with masking tape before release/gel coat, lay-up, then sanded out after dress up to remove the transfer of the masking tape block offs, thus it leaves your mold adaptable for a 69 Daytona hood or a 70 Charger hood, and the customer avoids cutting thru and opening up the skin to remove the crush zone ribs and possibly fubaring the hood.....

MikeG/DAYCLONA