Where to get 1 inch or larger torsion bars at the best price?

[Blakcharger440]

Anybody know where to get 1 inch or larger torsion bars at a good price?

[Troy]

Firm Feel? $260. I know most of this stuff went up over the last year or so. You used to be able to get MP bars for $199 per set but now they're $299.

Troy

[firefighter3931]

Firm Feel? $260. I know most of this stuff went up over the last year or so. You used to be able to get MP bars for $199 per set but now they're $299.

Troy

http://www.firmfeel.com/torsionb_b.htm

[myaerocars]

I just ordered  a set from Rick at Firmfeel.. the 1 inch bars from them  just this week  to go with the stage 2 power steering box I have already installed.    I hope to add the front and rear big bars as well next year..  It will be after the holidays before I  get them installled though.

Great people to deal with.... I highly recommend them.

Godspeed,
Jonathan Freeman
Superbird clone
Torino King Cobra clone

[gordo1968charger]

firm feel rock!

[kamkuda]

I used addco for the Cuda.  Works very well especially for $149.00
1 1/8 inch

http://store.summitracing.com/partdetail.asp?autofilter=1&part=ACO%2D541&N=700+4294908078+4294925083+4294908067+115&autoview=sku

[Rolling_Thunder]

Firm Feel is the only place to get 1"+ torsion bars as MP have discontinued their production of anything larger than .96"      

Sway bars are available from Addco as Kuda mentioned as well as Firm Feel. I got my massive sway bars from Hotchkis before they stopped making them. 1 3/8" front and 1" rear   

[Blakcharger440]

Dudes! I went to a Chrysler Dealership and they had a set of MP 1.22 torsion bars in their database at another dealership. I just got them today for $160!

[dc69383]

Try these guys   http://www.p-s-t.com/

[d72hemi]

Dudes! I went to a Chrysler Dealership and they had a set of MP 1.22 torsion bars in their database at another dealership. I just got them today for $160!

That is nearly 1 1/4 inches! what is the spring rate (firm feels 1.18 bars are rated at 338)? do you have a part number? If the parts department is open tomorrow I know where I will be going! the Bars in my 72 are shot; one side is as adjusted as far as it will go and I barely can go over the smallest of dips/bumps without bottoming out! 

[BROCK]

Here is a list of old DC part numbers with roll rates.
These are the 62-72 B bars. The spring rate starts
to increase in a hurry as the diameter increases.

...DIA....ROLL RATE......PART
.inches.....LB/FT........NUMBER
..0.86.........90
..0.88.........95
..0.90........100
..0.93........108
..1.06........227........P2948783
..1.10........263........P2948784
..1.14........304........P2948785
..1.18........349........P2948786
..1.22........399........P2948787
..1.25........440........P2948788
..1.33........564........P2948789
..1.38........654........P2948790
..1.46........817........P4120282
..1.50........910........P4120283



Happy hunting!