Do We Have Or Need A Vendor List Of Reproduction Wing Car Parts?

[A383Wing]

With all the interest in "making" Daytona or Superbird cars...I was wondering if anyone has started or was going to start a list of people or vendors who make various wing car items for sale. Such as:

Nosecone:  this person or that vendor
Wing ('glass or aluminum): person or vendor again

Etc, etc......see where this is going?

Does anyone else agree or disagree? I'm not trying to promote people or different vendors here, but I have seen a lot of threads asking where to get this or that item.....if we had a "all in one" list, might be nice.   

And to get the ball rolling, I make an aftermarket vacuum pod headlight switch replacement for the OE in-dash vacuum portion of the headlight switch used in all 68-69 Chargers & the Superbirds. A couple of people here have purchased & used them, and I have one in our Daytona since 1998 when we put the car together. OE headlight switches are hard to find, this is just an aftermarket retro fit item.

Bryan   

[nascarxx29]

In no order or preference the ones I recall are www.wingedwarriorbodyparts.com TX Jack M of wingcar fab in GA Gene Gregory IL Dayclona MA.Eric Nelson MN.Unique Movie Props Canada Don Currie .And Show car parts Canada.And ones we have seen on this board that fabricate 1 or more special parts wing trunk braces etc.But not wing body parts

[BigBlockSam]

 a list of vendors would be cool. does anybody have a link to dayclona's new website. Rene

[BROCK]

a list of vendors would be cool. does anybody have a link to dayclona's new website. Rene

http://www.officialdayclona.com/

[BigBlockSam]

thanks Brock

[hotrod98]

A parts vendor list would be nice, but what would we talk about when the occasional new wingcar builder comes around?

[nascarxx29]

 Jump to first unread post.  Pages: 1 | 2 | (show all)  Near the end of the page there is a paragraph a review of winged car parts vendors

cogen80
member


Reged: Nov 21 2007
Loc: none   Re: Battle of the wing clones [Re: Quikfish]
      #4057188 - Thu Dec 27 2007 08:32 AM   Edit     Reply     Quote     Quick Reply   




Quote:
--------------------------------------------------------------------------------

Superbird. You get:
Better colors
Cool graphics
better wing shape
more graceful nose
Pistol grip
Nicer seats
More refinements in body
beepbeep horn 


--------------------------------------------------------------------------------




and an ugly vinyl top so you can short cut your body work... lol.


it doesn't matter wich one you build.. its what ever one you like better... personally i think they are both ugly as hell.. the idea behind them is cool but man are they ugly cars.

Post Extras:           

LimeliteAero
master


Reged: Jan 20 2003
Loc: SE Pa.   Re: Battle of the wing clones [Re: cogen80]
      #4057252 - Thu Dec 27 2007 09:09 AM   Edit     Reply     Quote     Quick Reply   



My Daytona would be Black with a White tail and magnums!

I had a slim shot at an orange with black trim Daytona around '87 but the seller/original owner decided not to sell. 

Post Extras:           

7DRRunner
top fuel


Reged: Sep 15 2005
Loc: Haslett, MI   Re: Battle of the wing clones [Re: GTX MATT]
      #4057259 - Thu Dec 27 2007 09:12 AM Attachment (22 downloads)   Edit     Reply     Quote     Quick Reply   




Quote:
--------------------------------------------------------------------------------

How about a '69 Daytona Convertable?

I liek the Daytonas better for some reason. I usually like the Plymouths more than the Dodges, but the Daytonas are rarer and just cleaner looking IMO.


--------------------------------------------------------------------------------



ok here's one



--------------------
"Good luck on your project."

1970 Road Runner
"Accellertii Incredibus"

Post Extras:           

LimeliteAero
master


Reged: Jan 20 2003
Loc: SE Pa.   Re: Battle of the wing clones [Re: 7DRRunner]
      #4057287 - Thu Dec 27 2007 09:26 AM   Edit     Reply     Quote     Quick Reply   



I hate the rag-top wingcar conversions! 

Post Extras:           

RodStRace
top fuel


Reged: Sep 21 2005
Loc: El Cajon, CA   Re: Battle of the wing clones [Re: LimeliteAero]
      #4057304 - Thu Dec 27 2007 09:34 AM   Edit     Reply     Quote     Quick Reply   



There are fewer OE Daytonas, and the mods to do it somplete are a little easier.
Noses and wings are about the same, but the rear window is easier on the Daytona if you use a vega plug.
I've been lurking on a forum that covers real and clone cars. It has lots of info, and this is something you really want to research first. Many good points have been brought up here (superbirds have some more refinement and colors). The decision is yours so make sure you do the one that's right for you.
http://www.dodgecharger.com/forum/index.php/board,26.0.html

--------------------

Gotta get one of them new Challengers!
Rod=1940 Plymouth 5.2L/518
ST=1972 340 Demon 4 speed
Race=1971 Cuda
Daily driver=closest to High Impact available in '04.

Post Extras:           

BatmanFeller
super gas


Reged: Oct 19 2004
  Re: Battle of the wing clones [Re: RodStRace]
      #4057744 - Thu Dec 27 2007 12:46 PM   Edit     Reply     Quote     Quick Reply   



that ragtop purple daytona just doesnt look right---the ragtop just doesnt look right 

Post Extras:           

badgtx
master


Reged: Jan 20 2003
Loc: At a gas station near you   Re: Battle of the wing clones [Re: 69_SIX_PACK]
      #4057892 - Thu Dec 27 2007 02:02 PM   Edit     Reply     Quote     Quick Reply   




Quote:
--------------------------------------------------------------------------------

I've always wanted to do a 70 Daytona sunroof car. I think that would be a cool project.
GOOD LUCK!
Dave


--------------------------------------------------------------------------------


And it would be purple right? LOL!

Post Extras:           

kilo1
member


Reged: Feb 02 2006
Loc: US Army Grafenwoehr Germany   Re: Battle of the wing clones [Re: badgtx]
      #4057907 - Thu Dec 27 2007 02:09 PM   Edit     Reply     Quote     Quick Reply   





--------------------
USMC 1982-1988
US Army 2006---???

Post Extras:           

chargervert
super gas


Reged: Sep 18 2004
Loc: RI Deep in the rust belt   Re: Battle of the wing clones [Re: kilo1]
      #4057988 - Thu Dec 27 2007 02:45 PM   Edit     Reply     Quote     Quick Reply   



I vote Daytona too. I'm building two of them. One will be a stock 69,and the other will be a modified 70 Daytona/R/T mix. With all the good repro peices,an as original clone can be constructed,or a modified version can be built. Don't skimp on things like zeebars,and headlight pivots,and latch trays. All these peices should be of steel construction. Dayclona makes the best as original peices,but Eric Nelson,and a few other guys are also making usable peices. Although I haven't seen one in person,I did see pics of Danes new wing,and it looks like a decent peice. Jack McGaughy is making as original steel nosecones,and I believe that Gene Gregory may still be producing them also. Dayclona makes an awsome rear window plug,and offers the rear wing in steel,with the weight being comperable to the original wing. Dayclona also offers a steel valence,latch tray,and headlight pivots,and bucket assemblies as original. As far as fiberglass peices are concerned,Dayclonas nosecone is the thickest constructed nosecone,and the fit is acurate,Ted Janaks peices are quality peices,and his timeline for producing them,and getting them to the customer,has improoved greatly in the las few years,however I do not recommend using everything in fiberglass. I don't recomend fiberglass zee bars,headlight pivots/buckets/window plug/or wings. Other than that Janaks peices are very good quality. Stinger also offers a fiberglass kit,but the peices are not the quality of Dayclona,or Janak peices,and the fit is not as acurate,and many peices require a lot of reworking,to make them fit and function. The Vega hatch is an option,for the rear window plug,and there are several threads,on Dodge Charger.com,in their areo car section,that show step by step installation of these plugs. There are also a few guys on there offering some peices. Do not waste your time with the cheaply made kits from Show Cars,they are flimsy poorly made peices,that will require more work to make them work than they are worth. With the reproduction wingcar peices,you do get what you pay for,so if your cheap,thats what you will end up with,and it will show in the finished product! A mix of all the mid to high quality vendors can produce a wingcar that is both durable,and functional for many years to come. Depending on your budget,and what kind of wingcar you want to have,be it an as original,or a modified version. with the right mix of peices,from the right vendors,either is entirely possible.

--------------------
70 Charger R/T SE 472 Hemi
70 Charger R/T convertible
69 Charger Daytona/500
68 Charger 383
68 Charger 318
70 Road Runner 440 6 barrel
72 Charger 318
70 Challenger convertible
71 Challenger convertible
71 Cuda 340

[hemigeno]

I read that thread earlier tonight, and Pete (chargervert) did a nice write-up / assessment on the major clone parts vendors.  You can tell he really likes Dayclona's stuff, but overall he was very fair.

[nakita7]

Yes.

[xs29j8Bullitt]

I have been researching vendors for some of my upcoming projects.  I plan to get the nose cone & valance for my Daytona from Jack McGaughey:

http://www.wingcarfab.com/

Not all of the parts he makes are on his website.  Very friendly guy to talk to... not cheap, but quality parts from what I have heard from previous customers.

Below are some pictures that he emailed of the reproduction Daytona front valance...

XS

[xs29j8Bullitt]

Ted Janak has made fiberglass "reproduction" parts for winged cars for many years.  His parts might be the way to go for some folks building a clone, while others may be willing to spend the extra $$$ for metal reproduction parts.

http://www.wingedwarriorbodyparts.com/

XS

[xs29j8Bullitt]

Tony's Parts has the pricey but nice Daytona & Superbird reproduction scissor jacks made by Pete V.:

http://www.tonysparts.com/newproducts.htm

XS

[xs29j8Bullitt]

As mentioned earlier, Dayclona's new website is up & running.  Mike Goyette offers a wide variety of metal & fiberglass reproduction parts for the Aero Cars, including a few Charger 500 only parts (grille brackets)...

I will probably get some headlight buckets & other related items from Dayclona... they seem to to have the best nose internal parts at the moment.

Hopefully Dayclona will post some larger pictures of their parts on the new website... below is one of the thumbnail size ones now used.

http://www.officialdayclona.com/services

XS

[xs29j8Bullitt]

Our own daytonalo (dba Cupcake Repros  ) seems to make some good reproduction parts for winged cars, including scissors jacks, Daytona / Charger 500 trunk hinges, and SS A-Pillar Air Deflectors (chrome moldings).

Check out his current group buy offer on the A-Pillar moldings... 

http://www.dodgecharger.com/forum/index.php/topic,37905.0.html

XS

[moparstuart]

Our own daytonalo (dba Cupcake Repros  ) seems to make some good reproduction parts for winged cars, including scissors jacks, Daytona / Charger 500 trunk hinges, and SS A-Pillar Air Deflectors (chrome moldings).

Check out his current group buy offer on the A-Pillar moldings... 

http://www.dodgecharger.com/forum/index.php/topic,37905.0.html

XS

he also makes the daytona wing washers in steel   

[xs29j8Bullitt]

Gean Gregory currently is selling Superbird nose cones, Superbird & Daytona latch trays, and various other wing car & Mopar reproduction parts.  He has been running a discount on some of the parts on eBay ($4500 for SB nose cones, etc).  I talked to him at Monster Mopar, and it was unclear if he plans to do Daytona nose cones again..

http://motors.search.ebay.com/_W0QQsassZnewreproparts

XS

[xs29j8Bullitt]

The Daytona-Superbird Auto Club (Doug S.) offers a few parts for the wing cars:

http://www.superbirdclub.com/clubstoremopar.html

XS

[xs29j8Bullitt]

The Winged Warriors club also offers Superbird & Daytona grille screens... contact Sue George

http://www.wwnboa.org/

XS

[hotrod98]

I'm still making the wing braces. They're identical to the originals. I had a set of mine and an original set sitting next to them and it was almost impossible to tell them apart. I used an original set loaned to me by bigblocksam for the measurements. I plan to make another batch very soon and hope to keep the price at $90 plus shipping. 
I'm looking into stamping the deck lid closeouts early next year. The supply of reproductions out there is drying up since the molds were destroyed a few years ago. I'm checking with a couple of die makers now and I may be able to get them made without spending a lot of cash. Hopefully, that will keep the price down to a reasonable level.
As my new shop gears up in 2008, I really want to get more involved in making all types of parts.
I think the next problem is going to be in getting the vega plugs. The guys with complete vega bodies are reluctant to part with the hatchback since the car becomes basically worthless once that part is removed. I know where there are five or six vegas, but he wants to sell the complete cars. There is a company making fiberglass vega hatchbacks, but that would be a move in the wrong direction. No glass, no moldings and no way to attach it properly. We may be looking at having to use the reproduction steel plugs within the next few years.

[BigBlockSam]

great thread . alot of info. especially for some one in the planning stages. Rene

[moparstuart]

Gean Gregory currently is selling Superbird nose cones, Superbird & Daytona latch trays, and various other wing car & Mopar reproduction parts.  He has been running a discount on some of the parts on eBay ($4500 for SB nose cones, etc).  I talked to him at Monster Mopar, and it was unclear if he plans to do Daytona nose cones again..

http://motors.search.ebay.com/_W0QQsassZnewreproparts

XS

wow i would hate to have to buy all the little parts and pieces to load that nose up and be in working order

[A383Wing]

great thread . alot of info. especially for some one in the planning stages. Rene

This was kinda what I was getting at....now is someone going to make a list of everyone that makes or sells these items? Maybe make it on a word processor and keep it for later posting....mainly because I know this thread will eventually get buried.

Bryan  (just an idea, consider the source)

[daytonalo]

Let me know if you cant do Close-out , I think I can get it done . If I can get a Janek plug , I will make them in steel like Daytona SE did

[BigBlockSam]

wow i would hate to have to buy all the little parts and pieces to load that nose up and be in working orde 

just give your nose  and parts to daytonalo and he'll give ya back a working nose cone. thats what i did. 

[hotrod98]

Larry, do you plan to continue making all of the parts that you've made in the past? I don't want to duplicate any of the parts that the other members are making. Of course, I wouldn't even attempt to make those a-pillar trims. Those are a work of art. 
I still think that someone needs to build a complete working nose assembly. While the price would be a little high for some of the low-buck guys, many people might save up and go the simplest route. Bolt on and go.
The problem as I see it now is making all of these hodge podge parts fit and work together. This is where most of the guys are giving up.
Imagine the look on people's faces when they open up those boxes containing their "complete" Daytona kit from (insert supplier's name here) and see all of those loose unassembled, poorly fitting parts. It's an absolute joke. No drawings, no hardware, not even a thank you card.
In order to keep the price down and make the assembly easier, someone would need to build as many of the individual parts as possible. I haven't really thought out the total cost of building a complete nose, but it seems like if a guy could build them and keep the price at around 5k, people would probably step up and buy one. Of course a steel version would up the price at least another $3500 to $4000.
I realize that this is a rehash of an earlier conversation, but it seems like we're seeing more and more guys interested in building these cars and they don't have a decent place to start really. Part of the reason that I haven't gone any further on my own project is not having the time to spend to try to make these lousy parts work together. Maybe in 2008.
Any comments or new suggestions?

[daytonalo]

As of right now , A-piillar, wing washers and Hinges

Cha chi 

[Daytona R/T SE]

Let me know if you cant do Close-out , I think I can get it done . If I can get a Janek plug , I will make them in steel like Daytona SE did

That's Daytona R/T SE, Son !

[daytonalo]

Sorry CUPCAKE !!!!!!!!!!!!

[Daytona R/T SE]

Sorry CUPCAKE !!!!!!!!!!!!