DodgeCharger.com Forum
June 15, 2019, 07:15:00 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: I have updated the list of DodgeCharger.com shirts!
 
   Home   Help Calendar Login Register Chat  
Pages: [1]   Go Down
  Print  
Author Topic: where does the jack hold down bolt go  (Read 1050 times)
BigBlockSam
Old Timer
*****
Offline Offline

Posts: 8,035



« on: August 28, 2008, 06:14:20 PM »

hi guys

  does anyone have a measurement of where the bolt goes in the trunk,  that holds the jack down . Rene
Logged

I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img
hemigeno
Global Moderator
Old Timer
*****
Offline Offline

Posts: 6,387



« Reply #1 on: August 28, 2008, 06:26:26 PM »

Chris (Daytona RT / SE) was discussing his jack hold down bolt's mockup in this thread:

http://www.dodgecharger.com/forum/index.php/topic,32792.0.html

I think Chris used the dimensions from my original bolt's location, and it didn't work  (sorry again, Chris!)

About 11-3/4" or so from the corner of the trunk extension would work better than the 11" shown in the picture below.  The second picture's dimension of 11" should work fine though.


* 100_1319a.JPG (112.13 KB, 857x572 - viewed 285 times.)

* 100_1320a.JPG (106.5 KB, 572x857 - viewed 289 times.)
Logged
BigBlockSam
Old Timer
*****
Offline Offline

Posts: 8,035



« Reply #2 on: August 28, 2008, 07:23:31 PM »

thank you Gene , thats exactly what i needed . Rene
Logged

I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img
Daytona R/T SE
Old Timer
*****
Offline Offline

Posts: 5,491



« Reply #3 on: August 28, 2008, 10:23:12 PM »

Chris (Daytona RT / SE) was discussing his jack hold down bolt's mockup in this thread:

http://www.dodgecharger.com/forum/index.php/topic,32792.0.html

I think Chris used the dimensions from my original bolt's location, and it didn't work  (sorry again, Chris!)

About 11-3/4" or so from the corner of the trunk extension would work better than the 11" shown in the picture below.  The second picture's dimension of 11" should work fine though.



That reminds me....I still need to weld that "extra" hole up  Wink nana smilielol
Logged




It started out as a rusty, green '69 R/T SE.

Now, it's well on it's way to being a Daytona.

A fake Daytona, that is.
moparstuart
Old Timer
*****
Offline Offline

Posts: 26,981


Kansas Mafia Member , Overland park Ks.


« Reply #4 on: August 29, 2008, 07:31:32 AM »

Chris (Daytona RT / SE) was discussing his jack hold down bolt's mockup in this thread:

http://www.dodgecharger.com/forum/index.php/topic,32792.0.html

I think Chris used the dimensions from my original bolt's location, and it didn't work  (sorry again, Chris!)

About 11-3/4" or so from the corner of the trunk extension would work better than the 11" shown in the picture below.  The second picture's dimension of 11" should work fine though.



That reminds me....I still need to weld that "extra" hole up  Wink nana smilielol
   thanks for the lesson learned  hah smilielol
Logged

GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.11 | SMF © 2006-2009, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.05 seconds with 18 queries.