News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Seat belt question?

Started by steves66, October 25, 2005, 05:11:53 AM

Previous topic - Next topic

steves66

Have any of you put shoulder belts or the 5 point racing harness in your Chargers? I would like to do one of the two but not sure where to fasten the shoulder harness. Any ideas or pics would really be appreciated.

Reidar

I have been thinking that if ill pull out the backseat, I can use the bolts for the rear-seatbelts for the shoulder harness..
Havent tried it yet, but i guess it would work?

Just my  :Twocents:

Reidar

Chryco Psycho

to work correctly / safely the shoulder harnesses Must be mount very close to shoulder lever or higher , if they are mounted low they can be ineffective to dangerous as the belt forms an inverted V over the shoulder & you can be thrown forward with the belt jsut sliding over your shoulder
really you have to install some form of roll bar with the crossbar behind the seats near shoulder level to mount them properly