News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

What have you done with your Charger lately?

Started by XS29L9Bxxxxxx, August 19, 2012, 10:51:52 AM

Previous topic - Next topic

BLK 68 R/T

Finally took 5 minutes to install and connect the power wire on my glovebox light. Now 100% of my lights officially work.

krops cars

Didn't feel good. And it was something simple that no one would ever know. I got pumped when I installed my window washer tank and the squirt worked.

73chgrSE

Installed new power steering pressure hose.
Got 2 new Cooper radials up front 215/70/14.
Got plastic bushings to fix my wiper linkage.
Cleaned engine bay.

Kern Dog

Quote from: krops cars on September 27, 2019, 08:52:53 AM
Didn't feel good. And it was something simple that no one would ever know. I got pumped when I installed my window washer tank and the squirt worked.

A good squirt feels good to me as well.   :2thumbs:

73chgrSE

Drove up to year one and got a new float for the tank. We pulled the tank and cleaned it and saw the old float was full of gas. Guess that's why my gas gauge was not working lately. Also cut a new gasket for my power steering reservoir cap. 

b5blue

After about 20 years of thinking I'll replace the exhaust system when it fails I gave up and installed new factory look turn downs.

73chgrSE

Gonna do plugs this week. Also gonna pull an rebuilt the carb very soon.

Fitz73Chrgr

Put in a new stereo, a set of TTI long tubes and new exhaust on the '70  :coolgleamA:
'73 Charger - project                '70 Charger - driver                 '66 Charger - survivor

Resto thread:
http://www.dodgecharger.com/forum/index.php/topic,89803.msg1019541.html#msg1019541

DanielRobert

Lowered the rear of my 72 3"  hope its not too much!
1972 Charger
1969 Roadrunner
1974 Trans Am


ACUDANUT

 I am Old School. The back end is high and the front is low. :Twocents:

Kern Dog

Uhhh...YEAH, for that GREAT caster angle and better handling!   :slap:

ACUDANUT


Ghoste


6pkrtse

I had my red Charger out of the garage for a cruise yesterday after working on the Challenger for awhile and after doing leaves most of the day and bam, 4-6" of snow today here in Mi.
1963 Belvedere 413 Max Wedge
1970 Charger R/T S.E. 440 sixpack.
1970 Challenger R/T Drag Radial 528 Hemi
1970 Charger 500 S.E. 440 4 BBL
1970 Road Runner 383 4 BBL
1974 Chrysler New Yorker 440 4 BBL
1996 Dodge Ram 2500 V-10 488 cu in.
2004 Dodge Ram 3500 CTD Dually 6x6
2012 Challenger R/T Classic

DanielRobert

more than that(8" so far) at Woodward and 10 mile and the avg high is supposed to be 51*.....we're in for a long winter I guess ...need to heat this garage
1972 Charger
1969 Roadrunner
1974 Trans Am

73chgrSE

I took the front bumperettes off just to see what was under there. Now you can see her smile.  lol. I like the look so I may leave them off for a bit.

6pkrtse

Quote from: DanielRobert on November 11, 2019, 09:17:05 PM
more than that(8" so far) at Woodward and 10 mile and the avg high is supposed to be 51*.....we're in for a long winter I guess ...need to heat this garage
[/quote
Yes, probably had close to 8"-10" of snow by the time it was through last night. I bet it will be in the 50's again by Christmas. Lol.
1963 Belvedere 413 Max Wedge
1970 Charger R/T S.E. 440 sixpack.
1970 Challenger R/T Drag Radial 528 Hemi
1970 Charger 500 S.E. 440 4 BBL
1970 Road Runner 383 4 BBL
1974 Chrysler New Yorker 440 4 BBL
1996 Dodge Ram 2500 V-10 488 cu in.
2004 Dodge Ram 3500 CTD Dually 6x6
2012 Challenger R/T Classic

will

Got the 134 evacuated and got it inspected for next year. Going to put it away for the winter and hopefully get busy on it.

INTMD8

69 Charger. 438ci Gen2 hemi. Flex fuel. Holley HP efi. 595rwhp 475rwtq

djcarguy


Ghoste

Turned the heat on in the garage.  I didn't do that so "to" the Charger as "for" it.

INTMD8

Quote from: djcarguy on November 13, 2019, 04:58:47 AM
:popcrn: :popcrn:  Why ? what you doing to it??   :drool5: :2thumbs:

It's just a low compression "crate" 426 with a too big hydraulic cam.

So, only made 405rwhp and noses over after 6k rpm.

Going to bump up the compression to 11-1 or so, probably solid flat tappet, port the heads.  Haven't decided on porting the manifolds or just replacing with headers.

69 Charger. 438ci Gen2 hemi. Flex fuel. Holley HP efi. 595rwhp 475rwtq

ACUDANUT

Are solid flat tappet cam's idea for street use ?  :shruggy:

INTMD8

Why do you think it wouldn't be good for street use?
69 Charger. 438ci Gen2 hemi. Flex fuel. Holley HP efi. 595rwhp 475rwtq