DAYTONA CLONE IN TEXAS

[cdr]

http://cgi.ebay.com/ebaymotors/1970-Dodge-Charger-69-Daytona-clone-ac-auto-Lots-parts-nose-wing-500-/161045044983?pt=US_Cars_Trucks&hash=item257f085ef7

[JB400]

Looks like quite the project.  I can tell the nose is glass, but I couldn't tell if the wing was or not.   

[tan top]

 not expert on datona clone conversions  , but the actual conversion of adding the daytona stuff only   , looks like its been done pretty  good from the pictures   

[tan top]

 

[Stevearino]

I like the clever use of a window regulator and window motor to drive the headlight doors. This is a really good starting point  for someone. Not a lot of strenuous stuff to be done.

[Nwcharger]

I wouldn't pay that much without a title. Not a bad looking car though.

[moparstuart]

 

[A383Wing]

car was looking pretty good to me until I got to the frame rails & undercarriage

Bryan

[Speedfreak]

For someone looking to build one, this is an excellent start, depending on the price of course.  Would be nice to finish it off with a Hemi

[Mytur Binsdirti]

A blue interior will really compliment the car.

[WINGIN IT]

A blue interior will really compliment the car.

Not if you paint the car orange...

[Xenon]

Here is the text from Lucas site....

"Selling this for a friend of mine: This is a 1970 dodge charger with the 69 daytona 500 back glass and the daytona front clip and rear wing.
This is a clone charger needing full restoration,very solid charger,comes with lots of parts. no engine,but we can sell you a hemi or a 440 ??
please call with questions and I will email more pictures to interested parties.
This car needs to be sold by the end of the month, the best offer over 25,000 will get the car."


Wasn't there a blue clone with a 318 that is a driving car selling for close to this amount year or so ago.... ?

[cdr]

Here is the text from Lucas site....

"Selling this for a friend of mine: This is a 1970 dodge charger with the 69 daytona 500 back glass and the daytona front clip and rear wing.
This is a clone charger needing full restoration,very solid charger,comes with lots of parts. no engine,but we can sell you a hemi or a 440 ??
please call with questions and I will email more pictures to interested parties.
This car needs to be sold by the end of the month, the best offer over 25,000 will get the car."


Wasn't there a blue clone with a 318 that is a driving car selling for close to this amount year or so ago.... ?

looks like a vega rear glass.

[70moparman]

Looks like a cool project...  Wish it was mine 

[BigBlockSam]

hey . i tried to buy this car  along , long time ago . out of florida . it was in better shape back then . they never said anything about rusted rails . if they did i wouldn't have tries so hard to buy it . that scares me . i remember the wing was sagging in the middle too . i think at 9-10k its a good start for someone .

[petercharger]

You know I would say around 12 to 15.  Try buying all the Daytona clone products, then finding a 70 charger to make the conversion easier, and then pay yourself min wage for your time putting it to this point.  I would say it be closer
Too 15k....less the fram rails...   

[BigBlockSam]

i would say that if it wasn't for the frame rail replacement

[rob-dirt]

Same Car was Sold Off Moparts in May Hers The ADD 
Sold!! Thanks for the ad Moparts!



Janek parts on a 1970 B-5 in and out Charger. Originally was a 318 column auto with ps, pb, and a/c. Has buddy seat. From Nevada and is pretty solid. Electric headlights with steel rear window installed along with wing, brackets, nose cone, fender scoops, etc.. I have lots of new parts to go with this project, I just don't have time to do it. $19,500 with new seat covers, door panels, and lots of extra parts. Located in Florida panhandle. Will trade for car that doesn't need to be restored.