HAS ANYONE MADE THIS MANUAL STEERING SWAP?

[comet_666]

I have a manual steering/non AC 69 car, wanna upgrade to:
https://www.summitracing.com/parts/brg-999065

Currently my setup is 1 belt for the Crank water pump and alt. I have a 2 groove crank pulley.
Anything i'm missing? Has anyone used this for upgrade?

[matrout76]

i'm pretty sure that is the same kit i used and bought it from Mancini.

I think you have to use a 3-groove crank pulley and will double check tonight.

[comet_666]

Yah I was wondering about that, thank you!

[matrout76]

i forgot to look last night, and now i think my comment above may be wrong...

I'll check tonight and let you know for sure.  i do know that the crank and water pump pulleys that came with my car in a bucket of other engine parts, were not correct and i had to order new ones from 440 Source.  here are the PN's that i ordered:

Water Pump Pulley - Non A/C - New Reproduction 132-1002
Double Groove Crank Pulley - New Reproduction  132-1001
V-Belt - Alternator & Water Pump drive - Non A/C - NEW  138-1001
V-Belt - Power Steering drive - w/ steel pulleys  138-1002   

i'm planning to add AC later, but will deal with those pulley and belt changes at that time