News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Who has had success with a roller cam big block?

Started by Kern Dog, September 09, 2024, 01:29:08 AM

Previous topic - Next topic
Print
Go Down Pages 1 2 3 4 All
User actions

Kern Dog

#75
February 06, 2026, 12:49:03 PM
The Pre Val is around ten bucks too. CHEAP and simple.

Kern Dog

#76
Yesterday at 02:53:45 AM
Sometimes the prices of stuff sure jumps since the last time you bought it.
A 10 oz tube of "The Right Stuff" is forty bucks now? A Wix 51515 oil filter is fifteen?
I got two filters since I figure I should change the oil before and after the swap. Hydraulic lifters mean I set the preload and close it up. I tried to but Valvoline VR 1 in a 10 w 30 but couldn't find it at three stores I tried, only 20 w 50 and it is not advised to use oil that thick with these lifters. Amazon lists the 10 w 30 but won't ship it to California. I'll have to go to Summit Racing in Sparks Nevada.
Print
Go Up Pages 1 2 3 4 All
User actions