Where can I get a 22" Fan Shroud for Cheap?

[Johnnys440Charger]

Anyone know where I can get a 22" fan shroud for my 69 Charger 440?

Everything I've seen online is 160+tax/shipping.

Anyone selling one?   Don't care if its a used repo or oem.

Will the A-Body fan shrouds work?

[Khyron]

Make one, I did

[69bronzeT5]

How Jason? I need one for my Duster....

[Khyron]

I went to a metal yarn, bought some 4 foot of 4 inch wide aluminum sheet stock. bent it around, rivited some L pices in each corner and used a set of fan retainers to hold it on....

got about $30 into it and it looks good

[Khyron]

brb, i'll go out for a cigar and take a picture of it... was in a parade this weekend at a car show, stop and go and a lot of sitting around, with this and my electric fan the car never went higher the 190 degree *whoohoo*

[greenpigs]

You could measure the mounting holes then check summits Etc and see if they have something like it or close. I think it is offset so you may have a little more trouble adapting one to fit. I have a 72 radiator and shroud that works but isn't what I would consider the greatest setup. I thought mancini had one?http://chucker54.stores.yahoo.net/moreracofans.html

[Khyron]

or....

[Khyron]

if you had more time you could make the edge's sharper.

[bull]

I've been eyeballing a shroud I found at a wrecking yard that's on a 66 Fury wagon. It's the wrong style but it will fit and work as far as I can tell. If there are some wrecking yards in your area that have older cars you might take a tape measure and see what you can find, assuming you don't have to have the correct part.