News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Wiring loom bracket identification

Started by Hemidog, March 13, 2021, 09:36:48 AM

Previous topic - Next topic

Hemidog

The indicated "wiring loom holder" was mounted next to the starter cable brackets.
I found this thread, where it shows the mounting locations for 3 of the brackets: http://www.dodgecharger.com/forum/index.php?topic=43738.0

Can anyone identify the fourth? It has original paint on it, so I'm pretty sure it goes with the car.

Just 6T9 CHGR

Pretty sure that mounts on the back of the alternator...
Chris' '69 Charger R/T


Nacho-RT74

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Hemidog

Thanks! After I bent it a little bit, it made sense.