News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Need pix of rear window defogger with speaker for a 69

Started by Winged 1, June 24, 2007, 07:09:42 PM

Previous topic - Next topic

Winged 1

:icon_smile_question:
For a 69 charger
I would like to get a pix or 2 of a rear window defogger with the rear speaker attached in place. I have one of the units and for the life of me cant figure out how to mount the thing. I see what I think is the right way but the rear tray drops into the way, the way I see it any way?? Just would like a couple of pix or a diagram of sorts..
Thanx for the help!!
Eric

Nacho-RT74

I already sent you an email, but think this will be very helpfull to every body.

As far I know this setup wasn't available to B bodies, and in fact since 70 just to C and E bodies ( my 74 catalog just state available to E ), but setup fits on any car with 6x9 hole on passenger side

I don't have pics mounted on car but got some pic partially assemblied AND catalog diagram.
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

41husk

I think that is a different set up than my 73 Charger.  I thonlk I only had one 6x0 in the package shelf?
1969 Dodge Charger 500 440/727
1970 Challenger convertible 340/727
1970 Plymouth Duster FM3
1974 Dodge Dart /6/904
1983 Plymouth Scamp GT 2.2 Auto
1950 Dodge Pilot house pick up

Nacho-RT74

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

69CoronetRT

Quote from: Winged 1 on June 24, 2007, 07:09:42 PM
:icon_smile_question:
For a 69 charger
I would like to get a pix or 2 of a rear window defogger with the rear speaker attached in place. I have one of the units and for the life of me cant figure out how to mount the thing. I see what I think is the right way but the rear tray drops into the way, the way I see it any way?? Just would like a couple of pix or a diagram of sorts..
Thanx for the help!!
Eric

This pic may help...while it is from the 68 parts book, the 69 is the same.
Seeking information on '69 St. Louis plant VINs, SPDs and VONs. Buld sheets and tag pictures appreciated. Over 3,000 on file thanks to people like you.

Nacho-RT74

I think he is talking about the adaptor to mount both on same speaker hole
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Just 6T9 CHGR

If memory serves you only got 1 rear speaker if you opted for both on a 2nd gen Charger.  The motor mounts in the pass side speaker hole.

I added the rear defroster to my car along with 2 6x9 speakers.

I used the speaker holes for the speakers & I mounted the motor to another hole in the package tray.   The only reason for that is because the motor inlet needs fresh air from the pass compt...

To do this I had to mount the motor on the drivers side (originally it mounts on the pass side), use a longer piece of duct tubing & turn the plenum around as well.   I drilled 1 extra hole ( I was able to use 2 existing holes & mounted it using some rubber bushings in case of vibration.  it might not look pretty but it functions well & quietly.... I've used it on more than one occasion


Looking at the motor assy in my pic & the pic in Doug's 68 FSM you will see the bracket that mounts to the top of the motor that fits into the speaker opening
Chris' '69 Charger R/T


8WHEELER

Chris is right, 2nd gen Charger's only came with one speaker, weather or not you had the speaker
package and rear defrost.

Now if you had an E-Body you could get this setup, I plan on making one work in my car.

Dan

74 Dart Sport 360, just for added fun.

Nacho-RT74

Quote from: 8WHEELER on June 26, 2007, 01:50:30 AM


Now if you had an E-Body you could get this setup, I plan on making one work in my car.


Also C bodies...

BTW you could get 2 speakers on rear without rear deffog on stereo Setups, at least on 3rds
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Winged 1

;),
Thanx for the reply and help Dan. Now since I know you own a 68, hold the unit that you have up and then look at your package tray. There is an upside down A that protrudes toward the bottom of the tray. Due to the length of the unit , by the time you hold it up where the speaker should line up with the hole in the tray the back half hits the upside down A and you cant bolt to anything plus it is not a flat surface.. Hope I have explained good enough. Dan I am sure you have some package tray pix. Pull one up and you can see what I am talking about. Still hoping some one with one installed on a 68 or 69 can burn us a pix. I will have the same problem when I come over to install yours. Was hoping to get a little practice in first..
Thanx all for the help!!
Eric

8WHEELER

Eric, do you have the repo speaker defrost unit like in my top two pics?
or do you have an original correct unit as in my last two pics? both are for
E-Body and C-Body, I have yet to see one for a 68-70 B-Body, I would bet
there is no such animal, but  good luck Eric  :cheers:

Dan
74 Dart Sport 360, just for added fun.

Winged 1

 ;)
Thanx for the help Dan. Will just have to keep looking..

Armycopter

I know this is a super old thread but I thought I would give it some life as I am struggling with this exact issue 14 years later. There doesn't seem to be any other threads on this topic so I'm bringing this one back to life.

Does anyone know of a way to mount two rear speakers AND the factory rear defogger? Has anyone come up with a good solution during the past decade? 

My car has a factory defogger. It came with the car but was pulled out because the PO put in two speakers. I would really like to have my cake and eat it too here with both defogger and dual speakers.

The only way I can see to do it is mount the defogger somewhere else and extend the hose. OR maybe put surface mounted speakers on the rear deck. I'm not crazy about either solution.

Here is my current setup.
1969 Charger

70 sublime

Look at this thread in the 70 Charger registry

There is a picture in post #43 if you can find one of these you would be all set

http://www.1970chargerregistry.com/mboard/index.php?topic=3438.30

Guess I should have read this thread from the begining as they already talk about it
next project 70 Charger FJ5 green

Armycopter

Thanks but winged1 talks about it above and apparently it will not fit. I almost bought one before I saw his post.
1969 Charger

Nacho-RT74

the adaptor works just for E bodies and I think A bodies too ( mostly sure C bodies too ? ) but they don't fit on ANY B body. Not even 71/74 like BROCK says there. The dutchman panel is too short on them.

Maybe on 68/70 B bodies could made to work with some spacer to sway the weird tray they got there ?
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Armycopter

Wow Nacho-RT74 you were part of the original discussion. You have been on here a long time! That's awesome.
1969 Charger

Nacho-RT74

Being here since the beginning of this board what replaced a failed older board. And I began there on 2002/2003 LOL.

LOT of new learnts since that, and I hope my english has being getting better LOL

I got the adaptor to find didn't fit on my 74.
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Just 6T9 CHGR

Quote from: Armycopter on April 04, 2021, 01:49:59 PM
I know this is a super old thread but I thought I would give it some life as I am struggling with this exact issue 14 years later. There doesn't seem to be any other threads on this topic so I'm bringing this one back to life.

Does anyone know of a way to mount two rear speakers AND the factory rear defogger? Has anyone come up with a good solution during the past decade? 

My car has a factory defogger. It came with the car but was pulled out because the PO put in two speakers. I would really like to have my cake and eat it too here with both defogger and dual speakers.

The only way I can see to do it is mount the defogger somewhere else and extend the hose. OR maybe put surface mounted speakers on the rear deck. I'm not crazy about either solution.

Here is my current setup.

Look at my original post from 2007 on how I did mine......it aint pretty but it works....
Chris' '69 Charger R/T