Who has had success with a roller cam big block?

[Kern Dog]

I bought a $9 piece of all thread and made a tool to install the harmonic balancer...



I welded a scrap 3/4" socket to help hold the tool in place when cranking down the nut...



I used a bearing to reduce resistance.



Boom....



This will work for big blocks, LA and Magnum engines too.

[Kern Dog]

I am delaying the cam swap a short time while I concentrate on a 360 build of mine. I'm also helping a friend build a 360/408 for his 68 Dart.
Lots of stuff going on here!

[Kern Dog]

The 5.9/408 for Rich's Dart is in....



Body drop over the engine and transmission....





Then of course, I got to work on another project, the only 4 door that I've ever spent time putting together...



Front end rebuild and a BIG sway bar!

[70 sublime]

Why the plastic on the headers ?

[Kern Dog]

The headers were recoated and he wanted to keep them in place until the engine was in place.....He was avoiding scratches.