News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Anyone looking for a 400 engine ?

Started by ACUDANUT, January 18, 2019, 02:25:36 PM

Previous topic - Next topic
Print
Go Down Pages1 2 3 All
User actions

ACUDANUT

January 18, 2019, 02:25:36 PM
I don't know if I should post it for sale yet.  looking for advice. Does anyone even desire them. ?
I know I prefer the 383's, with it's forged crank and the beatings they can take.  :Twocents:

JB400

#1
January 18, 2019, 02:33:31 PM
They make a good start to a stroker.

moparstuart

#2
January 18, 2019, 03:36:10 PM
Quote from: ACUDANUT on January 18, 2019, 02:25:36 PM
I don't know if I should post it for sale yet.  looking for advice. Does anyone even desire them. ?
I know I prefer the 383's, with it's forged crank and the beatings they can take.  :Twocents:
yes  440 crank it and stroke it  , great motors 
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

Nacho-RT74

#3
January 18, 2019, 09:17:06 PM
440 crank
KB215 or 251 pistons if using 400 rods
KB280 if using 440 rods

aaand... done... you get a 440 into a 400 low deck with a bigger bore posibilities.

you decide the cam.

Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

XH29N0G

#4
January 19, 2019, 04:08:46 AM
If I were looking for a low deck, it would be a 400, and I would want to use it for a stroker.
Who in their right mind would say

"The science should not stand in the way of this."? 

Science is just observation and hypothesis.  Policy stands in the way.........

Or maybe it protects us. 

I suppose it depends on the specific case.....

green69rt

#5
January 19, 2019, 12:54:12 PM
Quote from: Nacho-RT74 on January 18, 2019, 09:17:06 PM
440 crank
KB215 or 251 pistons if using 400 rods
KB280 if using 440 rods

aaand... done... you get a 440 into a 400 low deck with a bigger bore posibilities.

you decide the cam.

Sort of what I was planning.  I didn't worry about the crank because it would get a new one with the stroker build.  Just look at a block though as it would get new parts for everything else.

What year??

71charger_fan

#6
January 19, 2019, 06:31:32 PM
Where is this 400 located?

aerolith

#8
January 20, 2019, 10:36:46 AM
Great motor indeed the lowly 400's.
The first castings in 1970 and 1971 were the strongest ever made!
1972 and 1973 are pretty dam good too.
We had 547ci stroked one in the UK that was 850hp on the motor and over a thousand horses with nitrous (on pump gas)
Was so quick it even beat the hemi Superstock cars in the 90's... :drive: :drive: :drive:

8.2 @ 182 mph 440yards on street DOT tyres :cheers:
Never send to know, for whom the bell tolls,
IT TOLLS FOR THEE...

John Donne 1623

Kern Dog

#9
January 21, 2019, 11:38:31 PM
Is the OP trying to sell off all his non 440 engines ??

ACUDANUT

#10
January 22, 2019, 08:51:55 PM
No Horn Dog. I just have these 2 engines laying around collecting dust.  If I had a 440 laying around, I would sell it too. I won't sell my (6) 426 Hemi's.  I am done with any future projects.
Stick with your Gay Midget Clown Porn with your BFF Poncho and leave me alone.  I don't troll on your posts.

moparstuart

#11
January 24, 2019, 12:34:49 PM
 :smilielol: :smilielol:
Quote from: ACUDANUT on January 22, 2019, 08:51:55 PM
No Horn Dog. I just have these 2 engines laying around collecting dust.  If I had a 440 laying around, I would sell it too. I won't sell my (6) 426 Hemi's.  I am done with any future projects.
Stick with your Gay Midget Clown Porn with your BFF Poncho and leave me alone.  I don't troll on your posts.
:smilielol: :smilielol: :smilielol: :smilielol: :popcrn:
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

Kern Dog

#12
January 24, 2019, 10:38:20 PM
Quote from: ACUDANUT on January 22, 2019, 08:51:55 PM
No Horn Dog. I just have these 2 engines laying around collecting dust.  If I had a 440 laying around, I would sell it too. I won't sell my (6) 426 Hemi's.  I am done with any future projects.
Stick with your Gay Midget Clown Porn with your BFF Poncho and leave me alone.  I don't troll on your posts.
Wow..you turned into an asshole. I just noticed that you posted about 2 different engines and politely asked about it. If you want to start some shit, I'll go back to picking apart everything you write including spelling mistakes, grammar errors and incorrect references. I have a full time job already but maybe I can knock off work a few hours each day to get this done.
You and I have PM'd several times and you have always been reasonable....but now you decide to be a dickhole?

Lennard

#13
January 25, 2019, 01:28:59 AM
 :popcrn:

timmycharger

#14
January 25, 2019, 07:53:25 AM
 " I won't sell my (6) 426 Hemi's.  I am done with any future projects."


Is this one of them?  :scratchchin:

https://www.ebay.com/itm/1970-426-HEMI-ENGINE-Original-GTX-Motor-Near-Complete/283347650594?hash=item41f8d60822:g:BiIAAOxy0bRS~TXy:rk:6:pf:0


I hope you are being sarcastic! Ill trade you a nice 440 six pack for one  :D

Ponch ®

#15
January 25, 2019, 01:32:36 PM
Quote from: ACUDANUT on January 22, 2019, 08:51:55 PM
No Horn Dog. I just have these 2 engines laying around collecting dust.  If I had a 440 laying around, I would sell it too. I won't sell my (6) 426 Hemi's.  I am done with any future projects.
Stick with your Gay Midget Clown Porn with your BFF Poncho and leave me alone.  I don't troll on your posts.

ACUDANUT's misdirected ire makes for strange bedfellows...
"I spent most of my money on cars, birds, and booze. The rest I squandered." - George Best

Chrysler Performance West

ACUDANUT

#16
January 25, 2019, 02:08:07 PM
 Porn Dog, you insulted me first. I was just firing back. Why do you have to use such profanity ?.
Spell check away.  

"Is the OP trying to sell off all his non 440 engines"  What kind of reaction did you expect ?

Ponch ®

#17
January 25, 2019, 02:24:36 PM
"I spent most of my money on cars, birds, and booze. The rest I squandered." - George Best

Chrysler Performance West

Lennard

#18
January 25, 2019, 04:25:32 PM
Quote from: ACUDANUT on January 25, 2019, 02:08:07 PM
Porn Dog, you insulted me first. I was just firing back. Why do you have to use such profanity ?.
Spell check away.  

"Is the OP trying to sell off all his non 440 engines" ?
Yes Greg, that is a VERY insulting question! :sarcasmalert:

Kern Dog

#19
January 25, 2019, 09:14:47 PM
Hmmm...For all of the sarcasm and obnoxious stuff I have posted, THIS bothers someone?
:slap:

Alaskan_TA

#20
January 25, 2019, 09:41:54 PM
Quote from: Kern Dog on January 24, 2019, 10:38:20 PM
Quote from: ACUDANUT on January 22, 2019, 08:51:55 PM
No Horn Dog. I just have these 2 engines laying around collecting dust.  If I had a 440 laying around, I would sell it too. I won't sell my (6) 426 Hemi's.  I am done with any future projects.
Stick with your Gay Midget Clown Porn with your BFF Poncho and leave me alone.  I don't troll on your posts.
Wow..you turned into an asshole. I just noticed that you posted about 2 different engines and politely asked about it. If you want to start some shit, I'll go back to picking apart everything you write including spelling mistakes, grammar errors and incorrect references. I have a full time job already but maybe I can knock off work a few hours each day to get this done.
You and I have PM'd several times and you have always been reasonable....but now you decide to be a dickhole?

QuoteHmmm...For all of the sarcasm and obnoxious stuff I have posted, THIS bothers someone?  slap

Yes it does.

No need for anyone to curse, be insulting or call names here.  :Twocents:

Lennard

#21
January 25, 2019, 09:59:24 PM
ACUDANUTZ is full of shit. A couple of weeks ago in another topic he called me a dick amongst other things. It was so bad that one of the mods deleted it. And now he's acting like he's offended by someone else's profanity.  :pity:

Alaskan_TA

#22
January 25, 2019, 10:08:11 PM
Profanity begets more profanity.


Maybe the forum administrator can block swearing & name calling in addition to political topics?  :scratchchin:

Alaskan_TA

#23
January 25, 2019, 10:10:16 PM
I tried to 'report' my last post so the idea could be considered.

but........

Lennard

#24
January 25, 2019, 10:28:46 PM
I personally have no problem with profanity... but ACUDANUTZ is acting all butt hurt when it's being used towards him, while he's using it himself at his own leisure towards others.
That's called being a hypocrit... or two faced... or...
Print
Go Up Pages1 2 3 All
User actions